The question I get over and over again is what does the QuickSweep Technology do for my Lexium FastAlign 5110Pro?
That is a very good question because there is only one meter that offers this technology that is so affordable and so full of features in such as small package. For those of you that do not know what a FastAlign® 5110Pro digital satellite meter is, well this meter is a professional grade satellite meter that allows a professional technician to align any satellite dish, C, Ku, or DSS, with ease.
Yes! this meter is priced very affordable, yet offers all the options needed by a technician to easily and quickly install any satellite dish.
Okay so lets get into what the QuickSweep Technology is.
The QuickSweep technology is used inside every Lexium FastAlign 5110Pro satellite meter finder.
This refers to the quick turn around time between the time that your dish locks onto the targeted satellite signal and the time that it’s displayed on the meter screen. This is made possible by the super fast processor and decoder used inside the FastAlign 5110Pro line of professional satellite meters. As you may have experienced with other meter with slower processors, usually, you have to move your dish very slowly, or move and stop, move and stop, in order to allow the meter or satellite receivers to process the signal it receives and turn around and display it on the screen. This sometimes can take up to 3 or 4 seconds. 3 or 4 seconds may not seem like a long time, when you consistently move your dish in order to try and lock into your targeted satellite signal, you may very easily pass your targeted satellite without getting a reading on the meter. This will waste your valuable time every time you try to do a satellite installation quickly and move to your next installation job, not to mention it can be very frustrating.
So again do you see the benefit to using a Lexium FastAlign 5110Pro satellite meter!
When it comes to meters, the choice is clear. Rely on the best by using a Lexium FastAlign 5110Pro satellite meter finder for your installation business regardless of where you are located around the world, in any continent, in any country!
The FastAlign® 5110Pro digital satellite meter is a professional grade satellite meter sold by Ideal Satellite Services an authorized dealer. This meter allows a professional technician to align any satellite dish, C, Ku, or DSS, with ease, thanks to the QuickSweep Technology exclusively available on LEXIUM meters. Priced afford-ably low, yet offers all the options needed by a technician to easily and quickly install any satellite dish.
The FastAlign® 5110Pro allows the user to use the parameters of the hundreds of preprogrammed satellite settings in the FastAlign® 5110Pro or the user can edit the transponder, symbol rate, polarity, and LNBF LO frequency all on one screen & directly from the oversize keyboard of the meter or with the new and improved PC software with the built in QuickRecovery® software.
Improvements over the older FastAlign® 5100Pro:
The new & improved Lexium FastAlign® 5110Pro has a few major differences than the previous model.
1. One of the most useful and obvious improvement is 3-digit azimuth reading. Now, you can be anywhere in the world and you can easily find the azimuth, elevation, and polarization of your targeted satellite. Just type in your latitude and longitude and the meter will automatically calculate your satellite dish settings for you.
2. A brand new screen that will give you a much better visibility in direct sunlight.
3. New and improved power circuitry draws less power from the battery while the meter is on stand-by (off). This gives you longer battery life than the older model, or the fake LEXIUM meters you may have seen being produced.
4. There are some changes that are made to the PC software of the new model. See the software improvements below QuickRecovery®.
Shop from Ideal Satellite Services via our secure shopping cart for only $179.95 with 2 year warranty included.
1. The first difference is the QuickRecovery®Software, which is only available on this meter Lexium FastAlign 5110Pro.
2. The second difference is that we have added a 22KHz switch column to the satellite list. Now you can set your 22KHz switch to “ON” or “OFF” and the setting will be saved when you load your meter with the new satellite list.
What is QuickRecovery® Software? QuickRecovery® Software restores your FastAlign 5110Pro satellite meter back to original factory condition after power or software/data transfer interruption that can almost always result in a dead meter. Here is how.
If you have had any experience with programming a satellite receiver via computer, you have more than likely ran into a situation that you accidentally either lost power, loaded a non-compatible software or channel list, or had an interruption during your transfer that resulted in your receiver “going bad” or dying and becoming useless. You may have heard people mentioning that you have to open the receiver, find the flash memory and having to JTag the receiver in order to reset or erase the flash memory and reloading the default software or channel/satellite list or software.
This is the same for almost any electronic device, including satellite meters. Software or data is stored on your meter’s flash memory. If you load the wrong software, or if you loose power while you are loading data to your meter, the flash memory becomes unusable resulting in a dead meter. Before, you had to open your meter, find the flash chip, use JTag hardware & software to erase the flash memory, then load factory software back onto your device. Sounds complicated? Yes, it could be, and it can also be very time consuming.
But now, with the all new QuickRecovery®Software that is built into the loader of the FastAlign 5110Pro, you don’t have to worry about any of this. If you were to load the wrong software, or if your power or data transfer gets interrupted, you can use the “Recovery” button on the loader software of the FastAlign 5110Pro satellite meter and your meter will go back to the original factory software and setting! This is another reason why you should always purchase a brand name satellite meter, like the Lexium FastAlign® 5110Pro.
Purchase your Lexium FastAlign® 5110Pro from Ideal Satellite Services via our secure shopping cart for only $179.95 with 2 year warranty included:
Buy your Lexium fastAlign® 5110Pro meter from Ideal Satellite Services today via our secure shopping cart for only $179.95 with the 2 year warranty included:
The satellite meter also features back light to allow the satellite installer to install in the dark. The screen is divided into 5 sections.
The top section provides the Azimuth, Elevation, and LNBF Polarization of the desired satellite.
The left middle section provides the location of the desired satellite, the transponder frequency, symbol rate, LNBF LO frequency, LNBF polarization ( 13=V / 18=H ), and 22KHz power.
The right middle section provides signal information such as signal level, signal quality, strength, and signal noise. If there is no “S” reading, there is no connection between the LNBF and the meter.
The left bottom section provides the databank of the pre-programmed satellite parameter.
The left bottom section provides the users Latitude, Longitude, and and meter information.
All this technical content was published by Lexium-dvb.com, we thank them for their great support and warranty (2 years)
Buenas hoy quiero hablar del medidor digital Lexium FastAlign 5110Pro para alinear antenas de satélite. Este medidor me ha convencido mucho por lo rápido y tan preciso que es. De todos los Lexium FastAlign 5110Pro que hemos vendido solo menciones positivas hemos recibido. Este medidor tiene es muy fácil de usar y mantener, no requiere cambiarle baterías porque son recargables. Otra cosa que es fantástico es esta función: si se te olvido cargar las baterías tu puedes usar el receptor de satélite para darle poder al medidor y al lnb. Esta opción me a salvado tiempo y plata. Claro todos los satélites en órbita están programados en el medidor y puedes programar tu propia lista con frecuencias que vas a utilizar todo el tiempo. También producimos un video para demostrar el medidor y lo puedes encontrar en nuestro canal de Youtube. Para facilitar mejor operación del medidor Lexium FastAlign 5110Pro tenemos software para programar el medidor con tu computadora. Si quieres obtener tu medidor digital FastAlign 5110Pro para alinear sistemas de satélite por favor visten nuestra página de red aquí. http://idealsatelliteservices.com/lexium_fastalign_5110pro.html
Si quieres compra el medidor aqui lo puedes comprar por medio de nuestro secure shopping cart.
The all new LEXIUM FastAlign 5110Pro with 3-digit azimuth display is in stock now & ready to ship. Contact Ideal Satellite Services for pricing information. Check out this new meter. The Lexium FastAlign 5110Pro is the most sold meter. The meter has QuickSweep technology built in to allow you to quickly align your satellite dish to your targeted satellite. The Lexium FastAlign 5110Pro is small easy to carry, powerful and it now comes with longer standby battery life. New features, like 3 digit azimuth display, better screen and more.
Lexium FastAlign 5110Pro
You know the best part about the Lexium FastAlign 5110Pro meter is the price and its warranty. The price is only $179.95 plus shipping and the warranty is a whopping 2 years.
